I use components that must support DirectPath I/O (intel DQ67EP, i5-2500T)
After setting a tick when selecting USB device DirectPath I/O and reboot instead of this device to turn nothing is stored in the device list incuided not. As if I did not choise.
I installed to check in PCIe slot USB controller NEC µPD720200 on the same chip as the and the motherboard as well as the USB controller on other chip VIA VL800 not help. I tried a lot of things: the bios options and disable the connection of devices, rules configuration files but the result is the former.
Any other device from the selection list on reboot ESXi included. Only not USB.