Hi
I'm not much of a linux guy, so I'm completely lost here. 
I have just set up a new ESXi 5.0 U1 on a new Fujitsu PRIMERGY TX100 S3, this server has two onboard NICs 82584L - only one shows up in the management configuration on the server, and I'm unable to add the 2nd NIC in vSphere.
Both NICs are enabled in BIOS an both are having link on the LED's.
As a test I have added a PCIe dual NIC card - which shows up just fine both in management network configuration and in the vSpHere client.
I have tried to use the command lspci -p and only 3 NIC's are displayed (of course).
Does anybody have any suggestions on what to do?
I have attached a log export - just in case anybody know what on eath it sayes 